Drive Shaft For COROLLA (_E12_) 1.4 VVT-i (ZZE120_, ZZE120R)

introduction

 

 

Drive Shaft for Toyota Corolla (E12) 1.4 VVT-i is a front-wheel drivetrain component designed to transfer engine torque from the transmission to the wheels, ensuring stable and efficient power delivery. The product is engineered for precise fitment based on OEM specifications, supporting reliable vehicle operation.

CV AXLE Product Specifications

Installation Location: Front Axle Left
Length: 635mm
Outer Spline Teeth (Wheel Side): 26
Outer Spline Teeth (Differential Side): 23
ABS Ring Teeth: 48

CAR MODEL:

COROLLA (_E12_) 1.4 VVT-i (ZZE120_, ZZE120R)

2001-2007

4ZZ-FE

1398

71

Hatchback

COROLLA Estate (_E12_) 1.4 VVT-i (ZZE120_, ZZE120R)

2002-2007

4ZZ-FE

1398

71

Estate

 COROLLA Saloon (_E12_) 1.4 VVT-i (ZZE120_, ZZE120R)

2001-2006

4ZZ-FE

1398

71

Saloon

Fit Precision

Configured with standardized shaft lengths, precise spline counts and joint diameters, matching OEM geometry for accurate installation and balanced drivetrain performance.

Durable Construction

Manufactured from high-strength steel for enhanced torsional strength and wear resistance, combined with neoprene rubber boots that provide reliable sealing performance and resistance to corrosion and temperature variations.

Stable Transmission

The inner CV joint supports an operating angle of up to 22° that exceeds conventional T-shaped inner cage designs, enabling smooth torque transmission even at varying angles during steering and suspension movement.

Optimized NVH Performance

The short sliding distance of CV joint helps reduce internal movement and friction, effectively minimizing vibration and noise.

Complete Assembly Supply

Delivered as a full axle/shaft assembly, reducing installation time and eliminating the need for separate CV joint or boot assembly.

Quality Assurance & Certification
 

CCL Autoparts is committed to delivering OE-quality products to the global aftermarket.
Quality System: Certified to ISO 9001 and IATF 16949 international automotive standards.
Warranty Policy: 12-month or 30,000 km warranty, ensuring reliable product performance and after-sales support.

Packaging

Professional packaging is used to prevent damage during international transit.
Inner Packaging: Branded box or neutral packaging.
Outer Packaging: High-strength corrugated cartons combined with woven bags for enhanced protection.

Q1: How do I confirm compatibility with my target market vehicles?

A: Match the OEM number and vehicle specifications such as engine code, model year, and drivetrain configuration to ensure accurate fitment.

Q2: What quality standards or testing are typically applied?

A: Products are generally inspected for functionality, balance, and durability to meet OE or aftermarket standards, ensuring stable torque transmission and reduced vibration during operation.

Q3: What are the typical application scenarios for this product?

A: Suitable for aftermarket replacement, repair workshops, distributors, and fleet maintenance where consistent performance and compatibility with Corolla E12 platforms are required.

Q4: What should be checked before installation or resale?

A: Verify spline count, joint diameter, and length specifications, and ensure no transport damage. Proper lubrication and sealing condition should also be checked before installation.

Mounting Position: Front Axle Left
Length: 633.5mm
External Gear Side: 26
Differential Side External Gear: 23
Length 1: 634mm
Sealing Ring Diameter: 61.5mm
ABS Ring Tooth Count: 48
Connector Type: Tripod Joint
Wheel-Side Connector Diameter: 89mm
Transmission-Side Connector Diameter: 77mm

Hot Tags: drive shaft for corolla (_e12_) 1.4 vvt-i (zze120_, zze120r), China drive shaft for corolla (_e12_) 1.4 vvt-i (zze120_, zze120r) manufacturers, suppliers, factory, attractive drive shaft investment, drive shaft manufacturer, drive shaft order, drive shaft technology, reducing drive shaft cost, short drive shaft lead time